Date: Thu, 14 Aug 2003 21:44:42 +0900 (KST) From: Ryu Sang Su To: sullivan@lanl.gov Subject: getting started Dear John, I have copied most of my source to /workarea/ryu/analysis_run3. You need to compile mvd, preco, anadst at least. You are likely to run into compilation error. I have not tried. You better try one of pro library because those won't change. I have been using one of new libraries since March which dispeared long before. We may need to move to the new framework, whatever it is, from preco. I have not tried either. mvdfuncs.C*, MvdDcms.cc*, anadst.cc* are the files you are likely to want to look into. Under wrk/78210 you will find some macros and scripts useful. For pedestal calibration I use these files: wrk/78210/0/run_sampleMacro_0 wrk/78210/0/sampleMacro_0.C framework/mvdfuncs.C.0. Most of links are broken because they come from many different locations on my computer at Yonsei. Calibration files I use most recently is wrk/78210/MvdCalib.mip.signalcut_2sigma. I cannot describe everything here. You better try compilation first. That done you may want to ask me lots of questions. Best regards, Sangsu