| This is the East half of the VTX. The cables are not pre-formed,
and run through the FVTX space.
| 
|
| Trying to fir a cage into the space, we can lower the cage, while
in the proper z-position. We can lower the cage to within 1 inch of the final
position, without exerting excessive force on the cables.
| 
|
| The pixel cables were not pre-bent.
| 
|
| Inside region, with the ends of the ladders top left.
| 
|
| The cooling hose manifolds
| 
|
| View of one of the 'combs' holding the VTX big wheels together.
| 
|
| Another comb
| 
|
| Same comb, situated in between VTX connectors
| 
|
| End view of the other side, showing comb location
| 
|