PLANES PROCESSOR ---------------- 09:21 AM Monday, November 23, 2009 Job Name: C:\02_job_tom\01_in_progress\126Y-267961_FVTX_FEM_PROTO_NEW_ REFDES\PCB\126Y-267961_FVTX_FEM_PROTO.pcb POSITIVE PLANE LAYER : 1 Plane Shapes Found On This Layer : 31 Plane Holes Found On This Layer : 2 PLANE NET : DGND Total Plane Shapes For This Net : 23 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 1244 Total Thru Pads Of This Net : 64 Total SMD Pads Of This Net : 1181 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 21 Thru Pads In This Plane : 0 SMD Pads In This Plane : 21 Pads To Be Buried In Plane : 42 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 21 Thru Pads In This Plane : 0 SMD Pads In This Plane : 21 Pads To Be Buried In Plane : 42 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 8 Thru Pads In This Plane : 0 SMD Pads In This Plane : 8 Pads To Be Buried In Plane : 16 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 8 Thru Pads In This Plane : 0 SMD Pads In This Plane : 8 Pads To Be Buried In Plane : 16 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 40 Thru Pads In This Plane : 0 SMD Pads In This Plane : 40 Pads To Be Buried In Plane : 80 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net DGND Via Pads In This Plane : 25 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads To Be Buried In Plane : 25 Unconnected To Plane : 0 Connected To Trace : 0 PLANE NET : +1.2V Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 126 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 124 Plane Created : Layer 1 - Net +1.2V Via Pads In This Plane : 44 Thru Pads In This Plane : 0 SMD Pads In This Plane : 46 Pads To Be Buried In Plane : 90 Unconnected To Plane : 0 Connected To Trace : 0 PLANE NET : +2.5V-D Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 343 Total Thru Pads Of This Net : 3 Total SMD Pads Of This Net : 475 Plane Created : Layer 1 - Net +2.5V-D Via Pads In This Plane : 20 Thru Pads In This Plane : 0 SMD Pads In This Plane : 23 Pads To Be Buried In Plane : 43 Unconnected To Plane : 0 Connected To Trace : 0 PLANE NET : +5V Total Plane Shapes For This Net : 3 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 40 Total Thru Pads Of This Net : 6 Total SMD Pads Of This Net : 48 Plane Created : Layer 1 - Net +5V Via Pads In This Plane : 10 Thru Pads In This Plane : 0 SMD Pads In This Plane : 12 Pads To Be Buried In Plane : 22 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net +5V Via Pads In This Plane : 10 Thru Pads In This Plane : 0 SMD Pads In This Plane : 12 Pads To Be Buried In Plane : 22 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 1 - Net +5V Via Pads In This Plane : 18 Thru Pads In This Plane : 0 SMD Pads In This Plane : 22 Pads To Be Buried In Plane : 40 Unconnected To Plane : 0 Connected To Trace : 0 PLANE NET : +3.3V-D Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 113 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 152 Plane Created : Layer 1 - Net +3.3V-D Via Pads In This Plane : 20 Thru Pads In This Plane : 0 SMD Pads In This Plane : 23 Pads To Be Buried In Plane : 43 Unconnected To Plane : 0 Connected To Trace : 0 PLANE NET : XSIG120165 Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 6th Default Hatch Distance : 6th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 0 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 2 Plane Created : Layer 1 - Net XSIG120165 Via Pads In This Plane : 0 Thru Pads In This Plane : 0 SMD Pads In This Plane : 2 Pads To Be Buried In Plane : 2 Unconnected To Plane : 0 Connected To Trace : 0 PLANE NET : XSIG120166 Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 6th Default Hatch Distance : 6th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 0 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 2 Plane Created : Layer 1 - Net XSIG120166 Via Pads In This Plane : 0 Thru Pads In This Plane : 0 SMD Pads In This Plane : 2 Pads To Be Buried In Plane : 2 Unconnected To Plane : 0 Connected To Trace : 0 POSITIVE PLANE LAYER : 2 Plane Shapes Found On This Layer : 0 Plane Holes Found On This Layer : 0 PLANE NET : DGND Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : YES Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 6th Mounting Hole / Contour Clearance : 6th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 20th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : YES Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 1244 Total Thru Pads Of This Net : 64 Total SMD Pads Of This Net : 0 Plane Created : Layer 2 - Net DGND Via Pads In This Plane : 1244 Thru Pads In This Plane : 64 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 1224 Pads With 3/4 Tie Connections : 13 Pads With 0/4 Tie Connections : 71 Total With 0 Tie Connections : 71 Connected To Trace : 0 No tieleg connections were due to isolation from plane, or the tielegs would have violated clearance requirements, or no tielegs were assigned to be created, or the pad belongs to a Routed Plane Pin, or the pad was a TestPad on top of another connected pad, or the pad was contained in a Plane No Connect Area. Total Pads Not Connected : 71 Coordinates (th) : 1) X=5,268 Y=8,212 Via 2) X=5,271 Y=6,006 Via 3) X=5,271 Y=6,065 Via 4) X=5,271 Y=6,143 Via 5) X=5,271 Y=6,203 Via 6) X=5,271 Y=6,282 Via 7) X=5,271 Y=6,400 Via 8) X=5,271 Y=8,589 Via 9) X=5,271 Y=8,667 Via 10) X=5,271 Y=8,725 Via 11) X=5,271 Y=8,805 Via 12) X=5,276.3 Y=2,887.33 Via 13) X=5,316 Y=2,440 Via 14) X=5,329 Y=3,002 Via 15) X=5,349 Y=6,380 Via 16) X=5,349 Y=6,439 Via 17) X=5,349 Y=7,977 Via 18) X=5,349 Y=8,076 Via 19) X=5,349 Y=8,114 Via 20) X=5,349 Y=8,530 Via 21) X=5,349.46 Y=7,103.15 Via 22) X=5,349.46 Y=7,221.26 Via 23) X=5,351 Y=2,556 Via 24) X=5,351 Y=2,635 Via 25) X=5,351 Y=2,674 Via 26) X=5,351 Y=2,772 Via 27) X=5,351 Y=2,891 Via 28) X=5,351 Y=7,372 Via 29) X=5,351 Y=7,859 Via 30) X=5,352 Y=7,438 Via 31) X=5,353 Y=7,304 Via 32) X=5,371 Y=6,993 Via 33) X=5,371 Y=7,748 Via 34) X=5,379.86 Y=7,553.04 Via 35) X=5,385 Y=8,309 Via 36) X=5,480 Y=8,480 Via 37) X=5,516 Y=5,949 Via 38) X=5,519 Y=2,801 Via 39) X=5,528 Y=6,510 Via 40) X=5,550 Y=8,805 Via 41) X=5,550.54 Y=6,182.86 Via 42) X=5,550.54 Y=6,399.39 Via 43) X=5,551 Y=6,065 Via 44) X=5,551 Y=6,143 Via 45) X=5,551 Y=6,282 Via 46) X=5,551 Y=7,064 Via 47) X=5,551 Y=7,123 Via 48) X=5,551 Y=7,497 Via 49) X=5,551 Y=8,253 Via 50) X=5,551 Y=8,589 Via 51) X=5,551 Y=8,667 Via 52) X=5,551 Y=8,706 Via 53) X=5,629 Y=7,102 Via 54) X=5,629 Y=7,222 Via 55) X=5,629 Y=7,300 Via 56) X=5,629 Y=7,359 Via 57) X=5,629 Y=7,437 Via 58) X=5,629 Y=7,977 Via 59) X=5,629 Y=8,115 Via 60) X=5,629 Y=8,193 Via 61) X=5,629.84 Y=7,858.84 Via 62) X=5,630 Y=8,076 Via 63) X=5,891 Y=7,970.5 Pin: P1-C9 64) X=5,991 Y=2,417 Pin: P2-B12 65) X=5,991 Y=6,570.5 Pin: P1-B23 66) X=5,991 Y=6,870.5 Pin: P1-B20 67) X=6,091 Y=6,970.5 Pin: P1-A19 68) X=6,091 Y=7,170.5 Pin: P1-A17 69) X=6,091 Y=7,370.5 Pin: P1-A15 70) X=6,091 Y=7,770.5 Pin: P1-A11 71) X=6,091 Y=7,970.5 Pin: P1-A9 Pads With 3 Tie Legs : 13 Coordinates (th) : 1) X=496 Y=5,333 Via 2) X=1,247.83 Y=4,982.28 Via 3) X=1,559 Y=1,071 Via 4) X=1,881.82 Y=8,213.7 Via 5) X=1,891.46 Y=8,279.96 Via 6) X=2,021.14 Y=1,055.63 Via 7) X=2,022.38 Y=1,121.2 Via 8) X=2,252.87 Y=8,039.97 Via 9) X=2,437.01 Y=3,101.61 Via 10) X=2,565.5 Y=1,024.67 Via 11) X=3,243.19 Y=5,966.85 Via 12) X=3,770.55 Y=2,745.03 Via 13) X=4,675.61 Y=6,838.02 Via POSITIVE PLANE LAYER : 4 Plane Shapes Found On This Layer : 0 Plane Holes Found On This Layer : 0 PLANE NET : +1.2V Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : YES Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 126 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 0 Plane Created : Layer 4 - Net +1.2V Via Pads In This Plane : 126 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 126 POSITIVE PLANE LAYER : 6 Plane Shapes Found On This Layer : 0 Plane Holes Found On This Layer : 0 PLANE NET : DGND Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : YES Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : YES Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 5th Default Hatch Distance : 5th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 1244 Total Thru Pads Of This Net : 64 Total SMD Pads Of This Net : 0 Plane Created : Layer 6 - Net DGND Via Pads In This Plane : 1244 Thru Pads In This Plane : 64 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 1294 Pads With 3/4 Tie Connections : 13 Pads With 2/4 Tie Connections : 1 Pads With 3 Tie Legs : 13 Coordinates (th) : 1) X=496 Y=5,333 Via 2) X=1,247.83 Y=4,982.28 Via 3) X=1,540 Y=8,419 Via 4) X=1,559 Y=1,071 Via 5) X=1,881.82 Y=8,213.7 Via 6) X=1,891.46 Y=8,279.96 Via 7) X=2,021.14 Y=1,055.63 Via 8) X=2,022.38 Y=1,121.2 Via 9) X=2,437.01 Y=3,101.61 Via 10) X=2,565.5 Y=1,024.67 Via 11) X=3,243.19 Y=5,966.85 Via 12) X=3,770.55 Y=2,745.03 Via 13) X=4,675.61 Y=6,838.02 Via Pads With 2 Tie Legs : 1 Coordinates (th) : 1) X=2,252.87 Y=8,039.97 Via POSITIVE PLANE LAYER : 9 Plane Shapes Found On This Layer : 2 Plane Holes Found On This Layer : 0 PLANE NET : +2.5V-D Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : YES Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 343 Total Thru Pads Of This Net : 3 Total SMD Pads Of This Net : 0 Plane Created : Layer 9 - Net +2.5V-D Via Pads In This Plane : 339 Thru Pads In This Plane : 3 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 307 Pads With 3/4 Tie Connections : 35 Pads With 3 Tie Legs : 35 Coordinates (th) : 1) X=940.93 Y=3,395.48 Via 2) X=945.98 Y=4,858.85 Via 3) X=946.78 Y=4,119.01 Via 4) X=1,199.42 Y=6,119.85 Via 5) X=1,243.08 Y=3,617.87 Via 6) X=1,248.13 Y=5,081.24 Via 7) X=1,248.92 Y=4,341.4 Via 8) X=1,421.82 Y=5,817.71 Via 9) X=1,457.24 Y=3,344.06 Via 10) X=1,679.63 Y=3,041.92 Via 11) X=1,893.83 Y=3,100.34 Via 12) X=2,116.22 Y=2,798.19 Via 13) X=2,212.26 Y=8,583.38 Via 14) X=2,262.53 Y=6,366.68 Via 15) X=2,434.65 Y=8,281.24 Via 16) X=2,484.92 Y=6,064.54 Via 17) X=2,565.56 Y=1,122.48 Via 18) X=2,615.5 Y=3,101.59 Via 19) X=2,837.9 Y=2,799.45 Via 20) X=3,020.86 Y=6,366.8 Via 21) X=3,243.26 Y=6,064.66 Via 22) X=3,332.08 Y=3,099.48 Via 23) X=3,554.47 Y=2,797.34 Via 24) X=3,778.19 Y=6,376.8 Via 25) X=4,000.59 Y=6,074.66 Via 26) X=4,189.3 Y=6,137.53 Via 27) X=4,371.29 Y=3,336.77 Via 28) X=4,411.7 Y=5,835.39 Via 29) X=4,593.68 Y=3,034.62 Via 30) X=4,714.52 Y=4,486.43 Via 31) X=4,714.52 Y=5,275.48 Via 32) X=4,714.52 Y=3,697.11 Via 33) X=5,016.66 Y=4,708.83 Via 34) X=5,016.66 Y=5,497.88 Via 35) X=5,016.66 Y=3,919.51 Via PLANE NET : +5V Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 5th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 5th Default Hatch Distance : 5th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 40 Total Thru Pads Of This Net : 6 Total SMD Pads Of This Net : 0 Plane Created : Layer 9 - Net +5V Via Pads In This Plane : 40 Thru Pads In This Plane : 6 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 46 PLANE NET : XSIG070244 Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 15th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 9 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 0 Plane Created : Layer 9 - Net XSIG070244 Via Pads In This Plane : 9 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 9 POSITIVE PLANE LAYER : 11 Plane Shapes Found On This Layer : 0 Plane Holes Found On This Layer : 0 PLANE NET : +3.3V-D Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : YES Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 5th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 113 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 0 Plane Created : Layer 11 - Net +3.3V-D Via Pads In This Plane : 113 Thru Pads In This Plane : 0 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 111 Pads With 3/4 Tie Connections : 2 Pads With 3 Tie Legs : 2 Coordinates (th) : 1) X=496 Y=5,216 Via 2) X=496 Y=5,255 Via POSITIVE PLANE LAYER : 13 Plane Shapes Found On This Layer : 0 Plane Holes Found On This Layer : 0 PLANE NET : DGND Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : YES Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 6th Mounting Hole / Contour Clearance : 6th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Number Tie Legs : NONE Eliminate Untied Areas : YES Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 1244 Total Thru Pads Of This Net : 64 Total SMD Pads Of This Net : 0 Plane Created : Layer 13 - Net DGND Via Pads In This Plane : 1244 Thru Pads In This Plane : 64 SMD Pads In This Plane : 0 Pads With 4/4 Tie Connections : 1224 Pads With 3/4 Tie Connections : 13 Pads With 0/4 Tie Connections : 71 Total With 0 Tie Connections : 71 Connected To Trace : 0 No tieleg connections were due to isolation from plane, or the tielegs would have violated clearance requirements, or no tielegs were assigned to be created, or the pad belongs to a Routed Plane Pin, or the pad was a TestPad on top of another connected pad, or the pad was contained in a Plane No Connect Area. Total Pads Not Connected : 71 Coordinates (th) : 1) X=5,268 Y=8,212 Via 2) X=5,271 Y=6,006 Via 3) X=5,271 Y=6,065 Via 4) X=5,271 Y=6,143 Via 5) X=5,271 Y=6,203 Via 6) X=5,271 Y=6,282 Via 7) X=5,271 Y=6,400 Via 8) X=5,271 Y=8,589 Via 9) X=5,271 Y=8,667 Via 10) X=5,271 Y=8,725 Via 11) X=5,271 Y=8,805 Via 12) X=5,276.3 Y=2,887.33 Via 13) X=5,316 Y=2,440 Via 14) X=5,329 Y=3,002 Via 15) X=5,349 Y=6,380 Via 16) X=5,349 Y=6,439 Via 17) X=5,349 Y=7,977 Via 18) X=5,349 Y=8,076 Via 19) X=5,349 Y=8,114 Via 20) X=5,349 Y=8,530 Via 21) X=5,349.46 Y=7,103.15 Via 22) X=5,349.46 Y=7,221.26 Via 23) X=5,351 Y=2,556 Via 24) X=5,351 Y=2,635 Via 25) X=5,351 Y=2,674 Via 26) X=5,351 Y=2,772 Via 27) X=5,351 Y=2,891 Via 28) X=5,351 Y=7,372 Via 29) X=5,351 Y=7,859 Via 30) X=5,352 Y=7,438 Via 31) X=5,353 Y=7,304 Via 32) X=5,371 Y=6,993 Via 33) X=5,371 Y=7,748 Via 34) X=5,379.86 Y=7,553.04 Via 35) X=5,385 Y=8,309 Via 36) X=5,480 Y=8,480 Via 37) X=5,516 Y=5,949 Via 38) X=5,519 Y=2,801 Via 39) X=5,528 Y=6,510 Via 40) X=5,550 Y=8,805 Via 41) X=5,550.54 Y=6,182.86 Via 42) X=5,550.54 Y=6,399.39 Via 43) X=5,551 Y=6,065 Via 44) X=5,551 Y=6,143 Via 45) X=5,551 Y=6,282 Via 46) X=5,551 Y=7,064 Via 47) X=5,551 Y=7,123 Via 48) X=5,551 Y=7,497 Via 49) X=5,551 Y=8,253 Via 50) X=5,551 Y=8,589 Via 51) X=5,551 Y=8,667 Via 52) X=5,551 Y=8,706 Via 53) X=5,629 Y=7,102 Via 54) X=5,629 Y=7,222 Via 55) X=5,629 Y=7,300 Via 56) X=5,629 Y=7,359 Via 57) X=5,629 Y=7,437 Via 58) X=5,629 Y=7,977 Via 59) X=5,629 Y=8,115 Via 60) X=5,629 Y=8,193 Via 61) X=5,629.84 Y=7,858.84 Via 62) X=5,630 Y=8,076 Via 63) X=5,891 Y=7,970.5 Pin: P1-C9 64) X=5,991 Y=2,417 Pin: P2-B12 65) X=5,991 Y=6,570.5 Pin: P1-B23 66) X=5,991 Y=6,870.5 Pin: P1-B20 67) X=6,091 Y=6,970.5 Pin: P1-A19 68) X=6,091 Y=7,170.5 Pin: P1-A17 69) X=6,091 Y=7,370.5 Pin: P1-A15 70) X=6,091 Y=7,770.5 Pin: P1-A11 71) X=6,091 Y=7,970.5 Pin: P1-A9 Pads With 3 Tie Legs : 13 Coordinates (th) : 1) X=496 Y=5,333 Via 2) X=1,247.83 Y=4,982.28 Via 3) X=1,559 Y=1,071 Via 4) X=1,881.82 Y=8,213.7 Via 5) X=1,891.46 Y=8,279.96 Via 6) X=2,021.14 Y=1,055.63 Via 7) X=2,022.38 Y=1,121.2 Via 8) X=2,252.87 Y=8,039.97 Via 9) X=2,437.01 Y=3,101.61 Via 10) X=2,565.5 Y=1,024.67 Via 11) X=3,243.19 Y=5,966.85 Via 12) X=3,770.55 Y=2,745.03 Via 13) X=4,675.61 Y=6,838.02 Via POSITIVE PLANE LAYER : 14 Plane Shapes Found On This Layer : 4 Plane Holes Found On This Layer : 0 PLANE NET : DGND Total Plane Shapes For This Net : 2 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 6th Mounting Hole / Contour Clearance : 6th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : YES Use Padstack Thermal Definition : YES Default Via Tie Properties Number Tie Legs : BURIED Default Thru Tie Properties Number Tie Legs : BURIED Default SMD Tie Properties Number Tie Legs : BURIED Eliminate Untied Areas : YES Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 1244 Total Thru Pads Of This Net : 64 Total SMD Pads Of This Net : 293 Plane Created : Layer 14 - Net DGND Via Pads In This Plane : 32 Thru Pads In This Plane : 0 SMD Pads In This Plane : 29 Pads To Be Buried In Plane : 61 Unconnected To Plane : 0 Connected To Trace : 0 Plane Created : Layer 14 - Net DGND Via Pads In This Plane : 147 Thru Pads In This Plane : 0 SMD Pads In This Plane : 200 Pads To Be Buried In Plane : 347 Unconnected To Plane : 0 Connected To Trace : 0 PLANE NET : XSIG170248 Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 8 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 3 Plane Created : Layer 14 - Net XSIG170248 Via Pads In This Plane : 8 Thru Pads In This Plane : 0 SMD Pads In This Plane : 3 Pads With 4/4 Tie Connections : 9 Pads With 3/4 Tie Connections : 1 Pads With 2/4 Tie Connections : 1 Pads With 3 Tie Legs : 1 Coordinates (th) : 1) X=753.11 Y=1,599.47 Pin: R89-1 Pads With 2 Tie Legs : 1 Coordinates (th) : 1) X=826.1 Y=1,581.21 Pin: L8-1 PLANE NET : XSIG170257 Total Plane Shapes For This Net : 1 Use Route Border As Plane Shape : NO Create Actual Plane Shapes : NO Regenerate APS Connections Only : NO Generate Plane Data : YES Plane To Plane Clearance : 6th Plane To Other Metal Clearance : 0th Mounting Hole / Contour Clearance : 10th Minimum Plane Gap Distance : NA Use TieLeg Bridges If Needed : NO Use Padstack Thermal Definition : YES Default Via Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default Thru Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Default SMD Tie Properties Tie Leg Width : 8th Thermal Clearance : 6th Number Tie Legs : FOUR Tie Orientation : PREFER 0 Eliminate Untied Areas : NO Eliminate Single Tied Areas : NO Orthogonal Data Only : NO Discard Areas By Dimension : NO Default Hatch Width : 1th Default Hatch Distance : 1th Default Hatch Pattern : (|) Vertical Default Metal Percentage : 100.00 Total Via Pads Of This Net : 0 Total Thru Pads Of This Net : 0 Total SMD Pads Of This Net : 6 Plane Created : Layer 14 - Net XSIG170257 Via Pads In This Plane : 0 Thru Pads In This Plane : 0 SMD Pads In This Plane : 5 Pads With 3/4 Tie Connections : 1 Pads With 2/4 Tie Connections : 4 Pads With 3 Tie Legs : 1 Coordinates (th) : 1) X=642.13 Y=1,671.51 Pin: C467-1 Pads With 2 Tie Legs : 4 Coordinates (th) : 1) X=580.22 Y=1,792.54 Pin: L7-1 2) X=642.01 Y=1,599.67 Pin: R90-1 3) X=691.11 Y=1,599.47 Pin: R89-2 4) X=695.66 Y=1,491.52 Pin: C471-1 09:21 AM Monday, November 23, 2009