----------------------------
|      Drill Engine Log      |
|          Started           |
|  Mon Nov 23 09:22:12 2009  |
 ----------------------------

Removing Output/NCDrill/ThruHoleNonPlated.ncd
Removing Output/NCDrill/ThruHolePlated.ncd

Created drill file "Output/NCDrill/ThruHolePlated.ncd" for span from 1 to 14
Total holes, contours in this file 4010, 0

    Tool   Size (IN)    Tolerance (IN)     Plated   Count
    ----   ---------   -----------------   ------   -----
     06     0.0080        +/- 0.0030        YES     2171
     07     0.0120                          YES     1388
     08     0.0150                          YES     74
     01     0.0230                          YES     16
     05     0.0280                          YES     8
     04     0.0330                          YES     70
     11     0.0370                          YES     18
     02     0.0390                          YES     241
     03     0.0410                          YES     20
     10     0.0980                          YES     4


Created drill file "Output/NCDrill/ThruHoleNonPlated.ncd" for span from 1 to 14
Total holes, contours in this file 18, 0

    Tool   Size (IN)    Tolerance (IN)     Plated   Count
    ----   ---------   -----------------   ------   -----
     12     0.0610                          NO      4
     14     0.0670                          NO      4
     13     0.1100                          NO      2
     15     0.1140                          NO      6
     09     0.1660                          NO      2


 ----------------------------
|      Drill Engine Log      |
|          Finished          |
|  Mon Nov 23 09:22:13 2009  |
 ----------------------------