======================================================================= Expedition PCB - Pinnacle - Version EXP2005.3_070529.00 2005.3 ======================================================================= Job Directory: C:\Documents and Settings\176952\My Documents\ 126Y-267961_FVTX_FEM_PROTO\PCB\LogFiles\ Auto Route Report: AutoRouteReport07.txt Auto Route Scheme (Local): FILTERED_2007_RTSP_STEP1-ROUTING Tue Sep 22 20:22:22 2009 ======================================================================= ======================================================================= EDITOR CONTROL SETTINGS ======================================================================= Layers Enabled & Bias ............... 1V 2V 3V 4V 5H 6V 7H 8V 9H 10V 11V 12H 13H 14H 15H 16V Allow 45 Degree Corners ............. Yes Max Pins for Each Plane Fanout Via .. 3 Use Part Outlines as Via Blocks ..... No Allow One Additional Via / SMD Pin .. No Allow Vias .......................... Yes Regular Pattern ..................... Allow Semi-Regular Pattern ................ Allow Irregular Pattern ................... Allow Non-Serpentine Pattern .............. Allow ======================================================================= AUTO ROUTE SETUP INFORMATION ======================================================================= - Effort - Router Start End -------------------------------- Route.............. 1 5 Net Selection ..... Filtered Nets Unfix Diff Pair Nets Before Pass = No Fix Diff Pair Nets After Pass = No Unfix Tuned Nets Before Pass = No Fix Tuned Nets After Pass = No Unfix Other Nets Before Pass = No Fix Other Nets After Pass = No Fix Nets Routed This Pass = No Tune Delay......... Not Selected Net Selection ..... Filtered Nets Unfix Diff Pair Nets Before Pass = No Fix Diff Pair Nets After Pass = No Unfix Tuned Nets Before Pass = No Fix Tuned Nets After Pass = Yes Unfix Other Nets Before Pass = No Fix Other Nets After Pass = No Fix Nets Routed This Pass = No Allow Final Via Min and Finishing if not Routed 100% = No Allow trace spreading during finishing = Yes Checkpoint Interval = 30 (min) ======================================================================= ROUTE REPORT SUMMARY AFTER LAST PASS ======================================================================= ======================================================================= ROUTE RESULTS ======================================================================= Start Time: Tue Sep 22 20:22:00 2009 Total Netlines = 3212 Total Opens = 640 -Remaining Netlines- Total Percent Added Total CPU Time CLK Time Eff Tried Routed Opens Opens Routed Vias Vias hh:mm:ss hh:mm:ss ----------------------------------------------------------------------- 1 640 582 58 58 90.94% 529 3833 00:00:17 00:00:17 2 58 15 43 43 25.86% 21 3854 00:00:02 00:00:02 3 43 43 0 0 100.00% 115 3969 00:00:03 00:00:02 4 0 0 0 0 100.00% 0 3969 00:00:00 00:00:00 5 0 0 0 0 100.00% 0 3969 00:00:00 00:00:00 -------- -------- Total Time for this Router 00:00:22 00:00:21 Total Time for Auto Route Session 00:00:22 00:00:21 Total % Routed = 100.00 Total Opens = 0 ======================================================================= END OF AUTO ROUTE REPORT