=======================================================================
Expedition PCB - Pinnacle - Version EXP2005.3_070529.00 2005.3
=======================================================================
Job Directory:
	C:\Documents and Settings\176952\My Documents\
	126Y-267961_FVTX_FEM_PROTO\PCB\LogFiles\
Auto Route Report:   AutoRouteReport02.txt
Auto Route Scheme (Local):   FILTERED_2007_RTSP_STEP1-ROUTING

Tue Sep 22 20:04:51 2009

=======================================================================
=======================================================================
EDITOR CONTROL SETTINGS
=======================================================================
Layers Enabled & Bias ............... 1V 2V 3V 4V 5H 6H 7V 8H 9V 10V 11H 12V 13H 14H 15H 16V 
Allow 45 Degree Corners ............. Yes
Max Pins for Each Plane Fanout Via .. 3
Use Part Outlines as Via Blocks ..... No

Allow One Additional Via / SMD Pin .. No
Allow Vias .......................... Yes
Regular Pattern ..................... Allow
Semi-Regular Pattern ................ Allow
Irregular Pattern ................... Allow
Non-Serpentine Pattern .............. Allow

=======================================================================
AUTO ROUTE SETUP INFORMATION
=======================================================================
                    - Effort -
Router              Start  End
--------------------------------
Route.............. 1      5
Net Selection ..... Filtered Nets

Unfix Diff Pair Nets Before Pass = No
Fix Diff Pair Nets After Pass = No
Unfix Tuned Nets Before Pass = No
Fix Tuned Nets After Pass = No
Unfix Other Nets Before Pass = No
Fix Other Nets After Pass = No
Fix Nets Routed This Pass = No
Tune Delay......... Not Selected
Net Selection ..... Filtered Nets

Unfix Diff Pair Nets Before Pass = No
Fix Diff Pair Nets After Pass = No
Unfix Tuned Nets Before Pass = No
Fix Tuned Nets After Pass = Yes
Unfix Other Nets Before Pass = No
Fix Other Nets After Pass = No
Fix Nets Routed This Pass = No
Allow Final Via Min and Finishing if not Routed 100% = No
Allow trace spreading during finishing = Yes
Checkpoint Interval = 30 (min)

=======================================================================
ROUTE REPORT SUMMARY AFTER LAST PASS
=======================================================================
=======================================================================
ROUTE RESULTS
=======================================================================
Start Time: Tue Sep 22 20:01:02 2009             Total Netlines = 3212
                                                 Total Opens    = 640

    -Remaining Netlines- Total  Percent Added Total  CPU Time  CLK Time
Eff Tried  Routed Opens  Opens  Routed  Vias  Vias   hh:mm:ss  hh:mm:ss
-----------------------------------------------------------------------
1   640    435    205    205     67.97% 387   3690   00:00:22  00:00:21
2   205    34     171    171     16.59% 64    3754   00:00:09  00:00:09
3   171    146    25     25      85.38% 481   4235   00:01:56  00:01:56
4   25     23     2      2       92.00% 164   4399   00:01:20  00:01:20
5   2      1      1      1       50.00% 8     4407   00:00:02  00:00:03
                                                     --------  --------
                          Total Time for this Router 00:03:48  00:03:49
                   Total Time for Auto Route Session 00:03:48  00:03:49

                                              Total % Routed    = 99.97
                                                 Total Opens    = 1

=======================================================================

END OF AUTO ROUTE REPORT