Beam test box
| Opening for the beam
We're reusing a stainless steel box that was used for an FVTX beam test. | 
|
| Plate that holds the stations | 
|
| Spacing between stations. There is space for 4 plates. | 
|
| Maps holder plate (gray) fits on the stainles plate in the box. The little feet match holes on the SS plate. | 
|
| The holder plate supports these boards. The sensor on the
RH carrier board is 30×15mm.
Alpide 3 carrier V3 (pdf) | 
|
Hubert van Hecke Last modified: Wed Jan 17 10:59:33 MST 2018