MuTr Calibration DAQ Procedure (update 1/7/02 MJL)

• these "special" runs should be taken when there is no beam, there is no run with the "grand partition" going, and in consultation with the shift leader.
• (other standalone runs can be going on simultaneously, as long as they do not hog too much of the DAQ bandwidth.)
• muTr HV does not need to be on.
• log into phoncs account on phoncs0; use a fresh window on phoncs0
• make sure to do a setuponcs
• cd ~phoncs/mutr/calib
• type "docalib" (it should finish in about 20 minutes).
• you can view the progress of the script by typing: tail -f "logfile name"
• check the run control logbook. If any of the muTr calibration runs have 8 or less events then the data is no good and the calibration will need to be repeated.
• the latest procedure (10/27/01) includes automatic analysis of the data as soon as it is taken
• results should appear on the web (after ~10 to 15 minutes) at, http://www.phenix.bnl.gov/phenix/WWW/publish/leitch/calib/calib_results/calib_results.html

More detailed information:

• Long version of DAQ procedure.
• Analysis procedure.