| Pat's fiber light injector ( Broadcom HFBR series), Measured up and entered into OnShape for 3D printing. 
|
|
The injection fiber holder (above) clicks into the right. a piece that holds 7 output fibers snaps into the left. | 
|
This holds 7 1mm fibers. The left half is split so it can be squeezed to hold the fibers. The blue plate is a temporary foot to prevent tipping during the printing. | 
|
The three part should fit together - let's print them and see. | 
|
Hubert van Hecke Last modified: Tue Jan 3 14:47:12 MST 2017