---

Mounting Silicon assemblies onto C-cages - October 2002.

	Inner top (IT) and Inner Middle (IM) assemblies, no bias tabs
	Inner Bottom (IB) assemblies after folding of the Kapton cables, and with bias tabs glued (on the Silicon end) and soldered (on the Kapton cable end).
	Mounting fixture, with cage in place and centered, and with empty plenum, oriented for the Outer Bottom (OB) silicon. Note the grounding Zif connectors, the vacuum can.
	Opposite side view, showing the Silicon vacuum pickup fixture in the OB position.
	IB assembly, with Silicon on the bottom plate of the pickup jig. The adjustable levels are to accomodate the folded cable.
	Vacuum pickup being placed onto the Silicon
	Four cages can be processed simultaneously.
	IB assembly ready for transfer
	Araldite epoxy is applied using air-powered syringe.
	IB assembly is transferred to the cage. Note the MCM is still hanging loose.