Some Notes on CMZ switches in the E866 analysis MJL - 9/13/96 Type Switch Purpose (if on) ---- ------ --------------- backend hoist link data source etm use BOR/EOS from RAS files etmonl use previous spill's EOS (must be on if etm adn hoist on) etmbor synchronize to BOR and EOR to start and stop analysis hbook/nt hlimap use shared memory histograms (doesn't work on HP) ntp enable ntuples cwn use column-wise ntuples (otherwise row-wise) trigger tcmmon call tcmon and tmmon m.c. hbmc hist resolutions using m.c. thrown values general loose loose tracking cuts jactrack use tracker makedst make a dst farm farm CPS farm version farm1 CPS class1 farm2 CPS class2 farm3 CPS class3 histograms hodhist hodos tubhist proptubes timana drift chamber/tdc tzero " chksum " tvsd " dcmiss missed d.c. wires and times dcmiss2 2-d d.c. wiring check cpu risc not a VAX vax a VAX (good luck) hp an HP sgi an SGI Some common configurations: -------------------------- for link: on - hoist, hlimap, (etmbor) off - ntp, tcmmon no link: on - ntp off - hoist, hlimap, etmbor use etm offline: on - etm online: on - etm, etmonl, (etmbor) for pix: on - pix off - hoist, hlimap, etmbor motif pix: on - pix, MOTIF, x11, qx_sc off - hoist, hlimap, etmbor target analysis: namtgt=0, zscpln=225 in survey dump analysis: namtgt=7, zscpln=525 in survey